suntana passport 16 tanning bed maintenance

The bulbs will always specify their power in watts. For example, T5 would be five eighths of an inch, and T12 would be twelve eighths of an inch (i.e. T numbers are represented as the number of eighths of an inch. Occasionally, you might also need F59 bulbs if you have facial lamps. You typically can’t convert in the other direction. If you have F71 bulbs (the most common), then you can buy two inexpensive adapters per bulb to convert them to F73 or F72 RDC bulbs. F71 bulbs are almost always bi-pin, and F73 and F72 bulbs are almost always RDC. For example, F73 bulbs are about 73 inches long. The F number approximately corresponds to the length of the bulb in inches.

By far, the most common bulb lengths are F71, F73, and F72 (in that order). The F number (which stands for “fluorescent”) represents the length of a tanning bed bulb or lamp. That can be very difficult to find in this price range. To top it all off, they’re designed with technology to allow you to get a better balance between your face and body. As long as you tan in moderation, they give an excellent, dark tan rather than burning the skin. There are many tanning bulbs that burn rather than tan. These are powerful bronzing bulbs, so we recommend starting out with 10 minutes or less and then slowly increasing the time. You’ll have a hard time beating the price of these bulbs considering how long they last, their reliability, and their effectiveness. The bulbs are 100 watts, which is pretty standard. They’re strong enough to get a tan really fast, but not so strong that you’ll be at risk for overexposure. If you have a more common tanning bed which requires bi-pin bulbs, then we recommend the X Power Twister Dual Face & Body Tanning Lamp (picture below), which fit just about any tanning bed with bi-pin bulbs. RDC bulbs are essentially the same as bi-pin, but they have an adapter that covers the two pins. RDC stands for “Recessed Double Contact”. Bi-pin bulbs have two pins that stick out of the end, whereas RDC bulbs have a single notch at the end. We recommend looking at your current bulbs to see which kind of ends they have. The vast majority of beds use bi-pin bulbs nowadays, but some of the older beds use RDC bulbs. You should be aware that there are two basic types of tanning bulbs: (1) bi-pin and (2) RDC. If you have darker skin, you might also want to consider getting bronzing bulbs, which contain less UVB rays. Naturally, it’s also important to consider the longevity of the bulbs, cost, how many bulbs you need, and whether or not there’s a warranty on them.

You could think about whether you want a specialty bulb kit with face tanning, leg tanning, dual tone, or side and arm features. You should also consider the power (or wattage) of the bulbs. To make sure the bulb is compatible with your bed, you should consider physical characteristics of the bulbs such as the bulb type (bi-pin versus RDC), the length (F number), and the size (T number). There are several factors that need to be considered before replacing your tanning bulbs. It can be difficult to find the best bulbs for your tanning bed, and that’s why we’ve researched and we’re providing you with our top picks. Most bulbs begin to lose their optimal levels after approximately 600 to 900 hours of usage, depending on your specific bulbs. If you’re happy with the tanning bed you currently have and you’re just looking for new bulbs, then you can do that for a fraction of the cost of buying a new bed.

If you’re one of these people, you’ll be glad to know that almost all tanning beds are compatible with one of our tanning bed bulb recommendations on this post. With all this confusing information, it’s difficult for many people to find a set of bulbs that they’re confident will work with their tanning bed. There’s a lot of confusing and contradictory information out there about tanning bed bulbs.

Suntana passport 16 tanning bed maintenance